CNC Lathe, Horizontal Machining Center, Vertical Machining Center, CNC Turning Center Manufacturer in Taiwan
Home > Products > Vertical Machining Center > Ball Type Linear Guide Way M-Series > MV-1220
Vertical Machining Center MV-1220
Specifications
| ITEM | MV-1220 | |||||||||
| Table | Dimensions | 1500 × 650 (59.0 × 25.6) | ||||||||
| Working area | 1220 × 680 (48.0 × 26.8) | |||||||||
| T-slot | CD150 × 18 × 4 (CD5.9 × 0.7 × 4) | |||||||||
| Max. loading capacity | 1200 kg ( 2640 lbs ) | |||||||||
| Travel Range | Max. travel range of X/Y/Z-axis | 1220 / 680 / 680 (48.0x 26.8 × 26.8) | ||||||||
| Distance from spindle nose to table surface | 150-830 (5.9-32.7) | |||||||||
| Distance from spindle center to column | 760 (29.9) | |||||||||
| Spindle | Spindle taper | ISO No.40 | ||||||||
| Spindle nose outer diameter | Ø 70 ( Ø 2.8) | |||||||||
| Spindle speed | STD: 8000 rpm; OPT: 6000, 10000 rpm | |||||||||
| Feedrate | Feedrate of X/Y/Z-axis | 1 -6000 mm /min (0.04-236.2 ipm) | ||||||||
| Slideways of X/Y/Z-axis | Linear guideway | |||||||||
| Rapid traverse of X/Y/Z-axis | 30 m /min (1181 ipm) | |||||||||
| Tool Magazine | Tool capacity | 24 pcs; OPT: 30 pcs | ||||||||
| Tool selection | Bi-direction & the shortest selection | |||||||||
| Max. adjacent tool diameter × length | Ø 80 × 250 ( Ø 3.15 × 9.8) | |||||||||
| Max. tool weight | 6 kg (13.2 lbs) | |||||||||
| Tool shank | BT40 or V40CT or V40 ANSI | |||||||||
| Drive Motor | Spindle drive motor | 11/15 kW (15/20 HP); OPT: 15/18.5 kW (20/25 HP) |
||||||||
| Servo motors of X/Y/Z-axis | 4 kW (5.4 HP ) | |||||||||
| Coolant motor | 960 W (1.3 HP) | |||||||||
| Chip conveyor motor | 215 W ( 1/4 HP) | |||||||||
| Miscellaneous | Power requirement | 208-220V / 75 Amps/ 3 Phase | ||||||||
| Floor area (W × D × H) | 3380 × 2603 × 2670 (133 × 102.5 × 105) | |||||||||
| Packing dimension (W × D × H) | 4380 × 2700 × 3010 (172 × 106 × 118) | |||||||||
| Net weight (approx.) | 9910 kgs (21802 lbs) | |||||||||
| Gross weight (approx.) | 11110 kgs (24442 lbs) | |||||||||
| * Specifications are subject to change without notice | ||||||||||