Home > Products > Vertical Machining Center > Ball Type Linear Guide Way M-Series > MV-1060
Vertical Machining Center MV-1060

Specifications
| ITEM | MV-1060 | |||||||||
| Table | Dimensions | 1180 × 560 (46.5 × 22.0) | ||||||||
| Working area | 1060 × 620 (41.7 × 24.4) | |||||||||
| T-slot | CD125 × 18 × 4 (CD4.9 × 0.7 × 4) | |||||||||
| Max. loading capacity | 1000 kg ( 2200 lbs ) | |||||||||
| Travel Range | Max. travel range of X/Y/Z-axis | 1060 / 620 / 620 (41.7 × 24.4 × 24.4) | ||||||||
| Distance from spindle nose to table surface | 150-770 (5.9-30.3) | |||||||||
| Distance from spindle center to column | 680 (26.8) | |||||||||
| Spindle | Spindle taper | ISO No.40 | ||||||||
| Spindle nose outer diameter | Ø 70 ( Ø 2.76) | |||||||||
| Spindle speed | STD: 8000 rpm; OPT: 6000, 10000 rpm | |||||||||
| Feedrate | Feedrate of X/Y/Z-axis | 1 -6000 mm /min (0.04-236.2 ipm) | ||||||||
| Slideways of X/Y/Z-axis | Linear guideway | |||||||||
| Rapid traverse of X/Y/Z-axis | 30/30/ 30 m /min (1181/1181/1181 ipm) | |||||||||
| Tool Magazine | Tool capacity | STD: 24 pcs; OPT: 30 pcs | ||||||||
| Tool selection | Bi-direction | |||||||||
| Max. adjacent tool diameter × length | Ø 80 × 250 ( Ø 3.15 × 9.84) | |||||||||
| Max. tool weight | 6 kg (13.2 lbs) | |||||||||
| Tool shank | BT40 or V40CT or V40 ANSI | |||||||||
| Drive Motor | Spindle drive motor | STD: 7.5/11 kW (10/15 HP) OPT: 11/15 kW (15/20 HP) |
||||||||
| Servo motors of X/Y/Z-axis | 2.5 kW (3.4 HP) | |||||||||
| Coolant motor | 960 W (1.2 HP) | |||||||||
| Chip conveyor motor | 215 W (1/ 4 HP) | |||||||||
| Miscellaneous | Power requirement | 208-220V 60 cycle/ 75 Amps/ 3 Phase | ||||||||
| Floor area (W × D × H) | 2810 × 2603 × 2635 (110.6 × 102.5 × 103.7) | |||||||||
| Packing dimension (W × D × H) | 3010 × 2300 × 2550 (118.5 × 90.5 × 100.4) | |||||||||
| Net weight (approx.) | 6560 kgs (14432 lbs) | |||||||||
| Gross weight (approx.) | 7060 kgs (15532 lbs) | |||||||||
| * Specifications are subject to change without notice | ||||||||||
