Vertical Machining Center

Home > Products > Vertical Machining Center > Tapping Center > MT-500

Tapping Center

MT-500

Vertical Machining Center - MT-500

Specifications

ITEM MT-500
Table Table size 500 x 320
Max. table load 200 kg
Travel Range Max. travel range X/Y/Z-axis 450 / 300 / 300 (17.7 / 11.8 / 11.8)
Table to spindle nose 170 ~ 470 (6.7~18.5)
Rapid traverse rate of X/Y/Z-axis 48 / 48 / 60 m /min (1889 / 1889 / 1889 ipm)
Spindle Spindle taper BT30
Spindle speed 10,000 rpm
Pull stud MAS403 P30T-1(45°)
Tool Magazine Tool capacity 12 pcs
Max. tool weight (kgs) 3 (6.6 lb)
Max. tool length 200
ATC seppd (T-T)/ (C-C) 1.6 sec./ 2.5 sec.
Drive Motor Spindle motor 3.7/2.2 kW (5/2.9 HP)
Servo motor of X/Y/Z-axis 1.6 / 1.6 / 3.0 kW (2.16 / 2.16 / 4.05 HP)
Miscellaneous Floor space (mm) 1,200 × 2,230 × 2,480 (47.2 × 87.8 × 97.6)
Net weight (kgs) 2100
* Specifications are subject to change without notice

Standard Accessories

  1. FANUC 0i-MC controller
  2. Toolbox and tools
  3. Automatic lubrication system
  4. Tool coolant system
  5. Spindle air blow device
  6. Leveling bolts and pads
  1. Direct drive spindle system
  2. Work light
  3. Dual electric cases (Heat insulated)
  4. Dual -color alarm light
  5. Screw-type chip conveyer
  6. TFT LCD

Options Accessories

  1. Mitsubishi 64ASM controller
  2. Transformer, stabilizer
  3. Work piece air blow system
  4. 15,000 rpm high speed spindle (with spindle oil cooling system)
  5. Low inertia spindle motor (Mitsubishi)
  6. Coolant through spindle (CTS)
  7. CTS filter
  8. Air gun / Water gun
  9. Surround chip flushing system
  1. Oil /Water partition
  2. Auto. Tool length measurement
  3. Damaged cutting tool sensor
  4. Full enclosed splash guard
  5. Oil mist collector
  6. Auto. door
  7. High speed & high accuracy machining control mode G05 P10000 (Mitsubishi)
  8. The 4th axis (NC indexing Table)
  9. Fifth axis (4th axis with sloped rotary table)
TOP