Home > Products > Vertical Machining Center > Boxway Machining Center > BMV-1600

Vertical Machining Center BMV-1600

Vertical Machining Center BMV-1600

Specifications

ITEM BMV-1600
Table Dimensions 1700 × 870 (66.9 × 34.2)
Working area 1625 × 850 (64 × 33.5)
T-slot CD125 × 22 × 7 (4.92 × 0.86 × 7)
Max. loading capacity 2500 kg (5500 Ibs)
Travel Range Max. travel range of X/Y/Z axis 1625 / 850 / 762 (64 / 33.5 / 30)
Distance from spindle nose to table surface 152.5~914.5 (6~36)
Distance from spindle center to column 939 (37)
Spindle Spindle taper ISO No.50
Spindle nose outer diameter Ø100 (Ø3.94)
Spindle speed STD: 40~4000 rpm; OPT: 60~6000 rpm
Feedrate Feedrate of X/Y/Z-axis 1~ 4000 mm /min (0.04~157 ipm)
Slideways of X/Y/Z-axis Boxways
Rapid traverse of X/Y/Z-axis 15 m /min (591 ipm)
Tool Magazine Tool capacity STD: #50 32 pcs; OPT: 40 pcs
Max. adjacent tool diameter Ø 125 (Ø 4.92)
Max. tool length 400 (15.75)
Max. tool weight 18 kg (39.60 Ibs)
Tool shank BT 50 or V50 CT or V50 ANSI
Drive Motor Spindle drive motor STD: FANUC α 12 11/15 kW (15/20 HP)
OPT: FANUC α 15 18/22 kW (20/25 HP)
FANUC α 18 18/22 kW (24/29 HP)
Servo motor of X/Y/Z-axis FANUC α 30/2000 4.5 kW (6 HP )
Coolant motor 860 W (1.15 HP)
Chip conveyor motor 107.5 W (1/8HP)
Miscellaneous Power requirement 208-220 Volts/ 130 Amps/ 3 Phase
Floor area (W × D × H) 4200 × 3350 × 3400 (165.35 × 131.89 × 133.86)
Net weight (approx.) 19000 kg (41800 Ibs)
Gross weight (approx.) 20500 kg (45100 Ibs)
* Specifications are subject to change without prior notice.
Relative Products: