| ITEM |
BMV-1220 |
| Table |
Dimensions |
1500X650 (59.0 × 25.6) |
| Working area |
1220X680 (48.0 × 26.8) |
| T-slot |
CD150X18X4 (CD5.9 × 0.7 × 4) |
| Max. loading capacity |
1200 kg ( 2640 lbs ) |
| Travel Range |
Max. travel range of X/Y/Z-axis |
1220 / 680 / 680 (48.0x 26.8 × 26.8) |
| Distance from spindle nose to table surface |
150-830 (5.9-32.7) |
| Distance from spindle center to column |
760 (29.9) |
| Spindle |
Spindle taper |
ISO No.40 |
| Spindle nose outer diameter |
Ø 70 ( Ø 2.76) |
| Spindle speed |
STD: 8000 rpm; OPT: 6000, 10000 rpm |
| Feedrate |
Feedrate of X/Y/Z-axis |
1 -6000 mm /min (0.04-236.2 ipm) |
| Slideways of X/Y/Z-axis |
Box way |
| Rapid traverse of X/Y/Z-axis |
15 m /min (591 ipm) |
| Tool Magazine |
Tool capacity |
24 pcs |
| Tool selection |
Bi-direction & the shortest selection |
| Max. adjacent tool diameter × length |
Ø 80 × 250 ( Ø 3.15 × 9.84) |
| Max. tool weight |
6 kg (13.2 lbs) |
| Tool shank |
BT 40 or V40CT or V40 ANSI |
| Drive Motor |
Spindle drive motor |
11/15 kW (15/20 HP) ; 15/18.5 kW (20/25 HP) |
| Servo motors of X/Y/Z-axis |
4 kW (5.4 HP) |
| Coolant motor |
960 W (1.3 HP) |
| Chip conveyor motor |
215 W ( 1 / 4 HP) |
| Miscellaneous |
Power requirement |
208-220V 60 cycle/ 75 Amps/ 3 Phase |
| Floor area (W × D × H) |
3380 × 2603 × 2670 (133.1 × 102.5 × 105.1) |
| Net weight |
8000 kgs (17600 lbs) |
| Gross weight |
9000 kgs (19800 lbs) |
| * Specifications are subject to change without prior notice. |