| ITEM |
BMV-1060 |
| Table |
Dimensions |
1180X560 (46.5 × 22.0) |
| Working area |
1060X620 (41.7 × 24.4) |
| T-slot |
CD125X18X4 (CD4.9 × 0.7 × 4) |
| Max. loading capacity |
1000 kg ( 2200 lbs ) |
| Travel Range |
Max. travel range of X/Y/Z-axis |
1060 / 620 / 620 (41.7 × 24.4 × 24.4) |
| Distance from spindle nose to table surface |
150-770 (5.9-30.3) |
| Distance from spindle center to column |
680 (26.8) |
| Spindle |
Spindle taper |
ISO No.40 |
| Spindle nose outer diameter |
Ø 70 ( Ø 2.76) |
| Spindle speed |
STD: 8000 rpm; OPT: 6000, 10000 rpm |
| Feedrate |
Feedrate of X/Y/Z-axis |
1 -6000 mm /min (0.04-236.2 ipm) |
| Slideways of X/Y/Z-axis |
Box way |
| Rapid traverse of X/Y/Z-axis |
15 m /min (591 ipm) |
| Tool Magazine |
Tool capacity |
24 pcs |
| Tool selection |
Bi-direction |
| Max. adjacent tool diameter × length |
Ø 80 × 250 ( Ø 3.15 × 9.84) |
| Max. tool weight |
6 kg (13.2 lbs) |
| Tool shank |
BT 40 or V40CT or V40 ANSI |
| Drive Motor |
Spindle drive motor |
7.5/11 kW (10/15 HP); 11/15 kW (15/20HP) |
| Servo motors of X/Y/Z-axis |
2.5 kW (3.4 HP ) |
| Coolant motor |
960 W (1.3 HP) |
| Chip conveyor motor |
215 W (1 / 4 HP) |
| Miscellaneous |
Power requirement |
208-220V 60 cycle/ 75 Amps/ 3 Phase |
| Floor area (W × D × H) |
2810 × 2603 × 2635(110.6 × *102.5 × 103.7) |
| Net weight (approx.) |
6200 kgs (13640 lbs) |
| Gross weight (approx.) |
7000 kgs (15400 lbs) |
| * Specifications are subject to change without prior notice. |