CNC Lathe, Horizontal Machining Center, Vertical Machining Center, CNC Turning Center Manufacturer in Taiwan
Home > Products > Lathes > BM-Series > BML-280Y
CNC Turning Center BML-280Y
Specifications
| ITEM | BML-280Y | ||
| Capacity | Swing over bed | Ø 600 | |
| Max. diameter | Ø 240 | ||
| Max. length | 490 | ||
| Machine Body | Slant angle of bed | 60° | |
| Max. travel range of Z/X/Y-axis | 570 / 170 / ±30 | ||
| Servo Motor of Z/X/Y-axis | 3 / 3 / 3 kW | ||
| Rapid traverse rate of Z/X/Y-axis | 20 / 16 / 16 m/min | ||
| Spindle | Distance of spindle front bearing bore | C1: Ø 100 ; C1(OPT): Ø 120 C1(OPT): built-in Ø 120 |
|
| Diameter of spindle bore/Bar capacity | C1: Ø 62 / Ø 52 C1(OPT): Ø 86 / Ø 75 |
||
| Spindle nose type | C1;ASA A2-6; C1(OPT):ASA A2-8 |
||
| Taper of spindle bore | 1/20 | ||
| Spindle motor | C1: 11/15 kW; C1(OPT): 15/18.5 kW C1(OPT): built-in FANUC 180M/6000i |
||
| Spindle speed | C1: 8" chuck 4500 rpm; C1(OPT): 10" chuck 3500 rpm |
||
| Chuck diameter | C1:Ø 8" ; C1(OPT): Ø10" | ||
| Hydraulic Tailstock | Quill diameter | - | |
| Center taper | STD:MT. No.4 ; OPT: MT. No.5 | ||
| Center stroke | STD:437.5; OPT:367.5 | ||
| Turret | Type | Live Tooling | |
| Tool stations | STD: 8 | OPT: 12 | |
| Tool Shank | Υ 25 × 25 | ||
| Drive Motor | Coolant motor | 960 W | |
| Hydraulic motor | 1.5 kW | ||
| Chip conveyor motor | 0.2 W | ||
| Miscellaneous | Power requirement | 208-220 Volts / 100 Amps / 3 Phases / 60 Cycles | |
| Dimension (W× D × H) | 3780 × 1960 × 2241 | ||
| Packing dimensions (with chip conveyor) | 3840 × 2120 × 2400 | ||
| Net weight | 6500 kg | ||
| Gross weight | 6800 kg | ||
| * Specifications are subject to change without prior notice. | |||