Home > Products > Lathes > SL-Series > ML-480 (SL-200)

CNC Lathe ML-480

Old Model : SL-200

CNC Lathe - ML-480 (SL-200)

Specifications

ITEM ML-480 (SL-200)
Work Capacity Swing over bed Ø 480 (Ø18.9)
Swing over side Ø 321 (Ø12.6)
Max. machining diameter × length Ø 210 × 508 (Ø 7.9 ×20)
Machine Body Slant angle of bed 45 °
Max. travel range of Z/X-axis 520 / 176 (20.5 / 6.9)
Servo motor of Z/X-axis 1.8 / 1.8 KW
Rapid traverse rate of Z/X-axis 30 / 30 m /min (1181 / 1181 ipm)
Spindle Diameter of spindle front bearing bore Ø 100 (Ø 3.9)
Diameter of spindle bore/Draw bar bore Ø 62 / Ø 51 (Ø 2.4 / Ø 2)
Spindle nose type ASA A2-6
Taper of spindle bore 1/20
Spindle motor 11/15 KW (14.7 / 20 HP)
Spindle speed STD: 4500 rpm
Diameter of chuck STD: 8” hydraulic
Tools Turret Type Vertical
Tool capacity 10 pcs
Tool shank post 25 × 25 (1 × 1)
Boring diameter post Ø 40 / 5 pcs (Ø1 1/4/ 5 pcs)
Radial tool post -
Axial tool post -
Dual tool post -
Hydraulic Tailstock Quill diameter Ø 65 (Ø 2.56)
Tailstock travel 425 (16.7)
Center type Live
Quill taper MT No.4
Quill stroke 50 (1.79)
Drive Motor   Coolant motor 960 W
Hydraulic motor 745 W (1 HP)
Chip conveyor motor 215 W (1/4HP)
Accuracy Positioning (z/x) ±0.005
Repeatability (z/x) ±0.002
Miscellaneous Power requirement 208-220 Volts / 15 KVA / 50 Amps
Height from floor to spindle center 900 (35.4)
Height from bed to spindle center 290 (11.4)
Floor area (W × D × H) 2778 × 2230 × 1690 (109 × 88 × 67)
Packing Dimension (W × D × H) 2930 × 2270 × 1740 (115 × 89 × 69)
Net weight (ind. chip conveyor) 2900 kg (6380 Ibs)
Gross weight (incl. chip conveyor) 3120 kg (6864 Ibs)
* Specifications are subject to change without prior notice.

Standard Accessories

  1. FANUC 0i-Mate TC Controller
  2. Spindle Speed:4500 prm
  3. Spindle Motor:11 / 15 Kw
  4. 8" Hydraulic Chuck
  5. Hydraulic 10-Tool Turret
  6. 5 Wedge Type Tool Clamps (for OD Tools)
  7. 5 Boring Bar Holders
  8. Taper Sleeve (MT No. 1 & MT No.2 ) x O.D. 32
  9. Boring Bar Bushings (Ø8,10,12,16,20,25) x O.D. 32
  10. Hydraulic Tailstock with MT No.4 Quill
  1. Coolant System
  2. Leveling Bolts and Pads
  3. Grease Lubrication System
  4. Work Lamp
  5. End of Program Light
  6. Tool Kit
  7. One Set of Soft, Hard Jaws
  8. Operator's & Maintenace Manual
  9. Programming Manual
  10. Parts List

Options Accessories

  1. FANUC 0i-TC
  2. Siements Controller
  3. Mitsubishi Controller
  4. 8" Hydraulic Chuck (KITAGAWA)
  5. Hydraulic 8-Tool Turret
  6. Chain Type Chip Conveyor + Chip Bucket
  7. Parts Catcher
  8. Foot Pedal for Tailstock
  1. Manual or Automatic Tool Setter
  2. Turning Tool Holder (□ 20 x 20)
  3. Collet Chuck
  4. Bar Feeder
  5. Bar feeder Interface
  6. Oil Mist Collector
  7. Transformer
  8. Automatic Lubrication System
Relative Products: