CNC Lathe

Home > Products > Lathes > SL-Series > ML-330 (SL-120)

CNC Lathe ML-330

Old Model : SL-120

CNC Lathe - ML-330 (SL-120)

Features

  1. Engineered triangular headstock with wide base lowers machine center of gravity and creates increased rigidity.
  2. The precise heavy-duty turret with a quick indexing mechanism offers ideal cutting performance.
  3. Linear guideways provide high-speed rapid traverse rates, rugged machining yet precise positioning.
  4. The high quality fine grained cast iron base incorporates a 45 slant bed design and guarantees the overall machine stability, vibration dampening and long term accuracy.
  5. The large chip area, combined with the slant bed design and fully enclosed splashguards, optimizes coolant circulation, chip disposal and overall safety.

Specifications

ITEM ML-330 (SL-120)
Work Capacity   Slide Gang Type Turret Type
Swing over bed Ø 330 (Ø13)
Swing over side Ø 136 (Ø5.4) Ø 135 (Ø5.3)
Max. machining diameter × length Ø 135 × 150 (Ø5.3 × 5.9) Ø 128 × 130 (Ø5.0 × 5.1)
Machine Body Slant angle of bed 45 °
Max. travel range of Z/X-axis 230 / 230 (9.1 × 9.1) 230 / 107 (9.1 ×4.2 )
Servo motor of Z/X-axis 1.2 / 1.2 kW
Rapid traverse rate of Z/X-axis 30 / 30 m /min (1181 / 1181 ipm)
Spindle Diameter of spindle front bearing bore Ø 80 (Ø 3.2)
Diameter of spindle bore/Draw bar bore Ø 45 / Ø 35 (Ø1.77 / Ø1.38)
Spindle nose type ASA A2-5
Taper of spindle bore 1/20
Spindle motor STD: 5.5 / 7.5kW (7.4 / 10 HP)
OPT: 7.5 / 11 kW (10 / 14.7 HP)
Spindle speed STD: 6000 rpm
Diameter of chuck STD: 6” hydraulic OPT: 6" (KITAGAWA))
Tools Turret Type Slide Gang Type Turret Type
Tool capacity 6 pcs 8 pcs
Tool shank post 16 × 16 (5/8 × 5/8) 16 × 16 (5/8 × 5/8)
Boring diameter post Ø 25 / 2 pcs (Ø1 / 2 pcs) Ø 25 / 4 pcs (Ø1 / 4 pcs)
Radial tool post 16 × 16 (5/8 × 5/8) 1 pcs -
Axial tool post 16 × 16 (5/8 × 5/8) 2 pcs -
Dual tool post 16 × 16 (5/8 × 5/8) 1 pcs -
Hydraulic Tailstock Quill diameter -
Tailstock travel -
Center type -
Quill taper -
Quill stroke -
Drive Motor   Coolant motor 960 W
Hydraulic motor 745 W (1 HP)
Chip conveyor motor 215 W (1/4HP)
Accuracy Positioning (z/x) ±0.005
Repeatability (z/x) ±0.002
Miscellaneous Power requirement 208-220 Volts / 9 KVA / 50 Amps
Height from floor to spindle center 900 (35.4)
Height from bed to spindle center 255 (10)
Floor area (W × D × H) 2125 × 2140 (183.6 × 84.3)
Packing Dimension (W × D × H) 2380 × 2280 × 2030 (93.7 × 89.8 × 79.9)
Net weight (ind. chip conveyor) 2250 kg (4950 Ibs)
Gross weight (incl. chip conveyor) 2400 kg (5280 Ibs)
* Specifications are subject to change without notice

Standard Accessories

  1. FANUC 0i-Mate TC Controller
  2. Spindle Speed：6000 prm
  3. Spindle Motor：5.5 / 7.5 Kw
  4. 6" Hydraulic Chuck
  5. 6 Ses Gang Type Tool Holder (□16 x 16) (Incl. One set of Radial tool post, Two set of Axial tool post, One set of Dual tool post, Two set of Boring tool seat)
  6. Taper Sleeve (MT No. 1 & MT No.2 ) x O.D. 25
  7. Boring Bar Bushings (Ø8,10,12,16,20) x O.D. 25
  8. Coolant System
  1. Leveling Bolts and Pads
  2. Grease Lubrication System
  3. Work Lamp
  4. End of Program Light
  5. Tool Kit
  6. One Set of Soft, Hard Jaws
  7. Operator's & Maintenace Manual
  8. Programming Manual
  9. Parts List

Options Accessories

  1. FANUC 0i-TC
  2. Siements Controller
  3. Mitsubishi Controller
  4. 6" Hydraulic Chuck (KITAGAWA)
  5. Hydraulic 8-Tool Turret
  6. Chain Type Chip Conveyor + Chip Bucket
  7. Arts Catcher
  1. Collet Chuck
  2. Bar Feeder
  3. Bar feeder Interface
  4. Oil Mist Collector
  5. Transformer
  6. Automatic Lubrication System
Relative Products:
TOP