CNC Lathe, Horizontal Machining Center, Vertical Machining Center, CNC Turning Center Manufacturer in Taiwan
Home > Products > Lathes > M-Series > ML-280
CNC Lathe ML-280
Specifications
| ITEM | ML-280 | |||||||||
| Capacity | Swing over bed | Ø 600 (Ø 23.63) | ||||||||
| Diameter × length | Ø 255 × 600 (Ø 8.27 × 23.63 ) | |||||||||
| Max. diameter | Ø 300 (Ø 11.03) | |||||||||
| Machine Body | Slant angle of bed | 30° | ||||||||
| Max. travel range of Z/X-axis | 600 / 170 (23.63 × 6.70) | |||||||||
| Servo Motor of Z/X-axis | Z-axis: 3 kW (HP) ; X-axis: 3 kW (HP) | |||||||||
| Rapid traverse rate of Z/X-axis | 20 / 16 m/min (787.3 / 630 ipm) | |||||||||
|
STD: Ø 100 (Ø 3.94) ; OPT: Ø 120 (Ø 4.72) | |||||||||
| Diameter of spindle bore/Draw bar bore | STD: Ø 62 / Ø 52 (Ø 2.44 / Ø 2.05) OPT: Ø 86 / Ø 75 (Ø 3.38 / Ø 2.95) |
|||||||||
| Spindle nose type | STD;ASA A2-6; OPT:ASA A2-8; | |||||||||
| Taper of spindle bore | 1/20 | |||||||||
| Spindle motor | STD: 11/15 kW (15/20 HP) ; OPT: 15/18.5 kW (20/25 HP) |
|||||||||
| Spindle speed | STD: 8” chuck 4500 rpm; OPT: 10” chuck 3500 rpm |
|||||||||
| Chuck diameter | STD: Ø 8” ; OPT: Ø 10” | |||||||||
| Hydraulic Tailstock | Quill diameter | - | ||||||||
| Tailstock travel | - | |||||||||
| Quill type | Live | |||||||||
| Quill taper | STD:MT. No.4 OPT: MT. No.5 | |||||||||
| Quill stroke | - | |||||||||
| Tool Turret | Type | Vertical | VDI | Live Tooling | ||||||
| Tool stations | OPT: 8 | STD: 10 | OPT: 12 | STD: 8 | OPT: 12 | STD: 8 | OPT: 12 | |||
| Boring bar holder | 4 | 5 | 6 | 4 | 6 | 2 | 3 | |||
| External tool holder | - | - | - | 2 | 4 | 2 | 4 | |||
| Internal holder | 2 | 2 | 2 | 2 | 2 | 1 | 2 | |||
| Radial power tool (PRR) | - | - | - | - | - | 1 | 1 | |||
| Axial power tool (PRA) | - | - | - | - | - | 2 | 2 | |||
| Tool shank | Υ 25 × 25 ( Υ 1 × 1) | |||||||||
| Drive Motor | Coolant motor | 860 W (1/1 HP) | ||||||||
| Hydraulic motor | 2.25 kW (3 HP) | |||||||||
| Chip conveyor motor | 180 W (1/4 HP) | |||||||||
| Miscellaneous | Power requirement | 208-220 Volts / 100 Amps / 3 Phase / 60 Cycles | ||||||||
| Height From Floor to Spindle | - | |||||||||
| Height From Bed to Spindle Center | - | |||||||||
| Floor area (W × D × H) | 2900 × 1950 | |||||||||
| Packing dimensions (with chip conveyor) | - | |||||||||
| Net weight | 5430 | |||||||||
| Gross weight | 5730 | |||||||||
| * Specifications are subject to change without notice | ||||||||||